Price a design

Pricing a design is working out what an embroidered piece costs and what to charge for it, from the stitch count you already have. Every rate is yours to set — the defaults are typical shop figures to start from.

The design

What it costs you

Mark-up is what you multiply your cost by, so 3× charges three times what the piece costs you to sew.

Thread & spools

Enter the length of one spool in meters, feet or yards, and the price you paid for that whole spool. The cost per meter follows from the two. The length of thread a design uses is read off its stitch count and average stitch length. A denser design is counted by its stitches. The waste allowance covers trims and color changes. The bobbin share is how much of the top thread the bobbin locks underneath — about a third on most machines.

Thread used, each

43.0 m

Top · 47.0 yd

15.1 m

Bobbin · 16.5 yd

58.1 m

Both · 63.5 yd

Top thread$0.28
Bobbin thread$0.09
Thread, each$0.37
Thread for 12$4.47
Sewing time (6 min)$3.00
Garment$0.00
Costs you, each$3.37
Digitizing, one-off$25.00
Total cost of the job$65.47

Charge each

$46.12

$15.37 of thread, color changes, time and garment, at 3× mark-up.

Stitches$6.00
Thread used$0.37
Colour changes (3)$6.00
Sewing time (6 min)$3.00
Garment$0.00
Costs you, each$15.37
12 pieces$553.40
Digitising, one-off$25.00
Order total$578.40
Left after costs (68%)$393.93

The stitch count is the number that matters most. Open a design in a studio to read it off the panel. You can also open a machine file someone sent you and read it there before you quote. Saved patterns keep their cost sheet, so reopening one brings the same figures back.