File formats

Stitch files, vector artwork, printable meshes and the G-code for a router or a laser — what each one holds, what reads it, and which to hand your machine.

A stitched embroidery hoop, a laser-engraved birch portrait tile, a 3D-printed relief block and a vinyl stencil on a cutting mat, side by side
The same upload can leave as a stitch file, a cut file, an engraved board or a print.

Embroidery machine files

Stitch data your machine reads needle point by needle point.

DST

Tajima stitch data

The stitch stream: every needle point, jump, color change and stop. No color names, no artwork.

Reads on Tajima, Barudan, Melco, SWF, ZSK and most commercial machines; the format stitching shops expect.

Pick it The safe default. Choose DST whenever you are unsure or sending a design out.

PES

Brother PES

The stitch data and the thread color list together, the way Brother home machines expect them.

Reads on Brother and Baby Lock home machines, from a USB stick or their own software, and most home embroidery programs.

Pick it A Brother or Baby Lock at home — the most common home format.

PEC

Brother PEC

The older Brother stitch block, with the thread list in its header.

Reads on Brother and Baby Lock machines and software that ask for PEC by name rather than PES.

Pick it When your machine or software names PEC, or you are loading an older Brother model.

JEF

Janome JEF / JEF+

Stitch data plus the color number of each thread in Janome’s own palette.

Reads on Janome home machines and newer Elna models. One file serves both JEF and JEF+.

Pick it A Janome or an Elna.

EXP

Melco EXP

A bare stitch stream with a wide coordinate range and no color table at all.

Reads on Melco, Bravo and Bernina machines, plus most commercial software.

Pick it When your machine, shop or software asks for EXP by name.

VP3

Pfaff / Viking VP3

Stitch data, the thread colors and the design metadata the machine uses to scale a design.

Reads on Pfaff and Husqvarna Viking machines that take VP3 on a USB stick.

Pick it A Pfaff or a Husqvarna Viking.

XXX

Singer XXX

Stitch data with the RGB value of each thread written after it.

Reads on Singer embroidery machines, and software that imports Singer files.

Pick it A Singer.

Vector files

Artwork as paths rather than stitches, for cutters, lasers, print and proofing.

SVG

Stitch path, from the embroidery editor

Every thread color drawn as its own stroked path at finished size. The design as artwork, not as stitch data.

Reads on Illustrator, Inkscape, Affinity, laser cutters, plotters, embroidery mock-ups.

Pick it When you need the design as a picture: a proof for a client, a print, a laser, a mock-up.

SVG

Cut file, from the cut studio

Closed filled shapes, one layer per color, traced for a blade rather than a needle.

Reads on Cricut Design Space, Silhouette Studio, Glowforge and most vinyl cutters and lasers.

Pick it Vinyl, card, stencils, appliqué templates and heat transfer.

3D print files

One solid mesh, measured in millimeters, ready for a slicer.

STL

Binary STL

The triangles of a relief, silhouette or scanned object at finished size. Smallest file for the same geometry.

Reads on Cura, PrusaSlicer, Bambu Studio, Orca, Chitubox and nearly every other slicer.

Pick it The default for printing.

STL

ASCII STL

The same triangles written out as readable text, several times the size.

Reads on Any slicer, plus tools and people who need to inspect a mesh by eye.

Pick it When a service or a colleague needs to read the file rather than print it.

CNC machine files

Toolpath moves a router or mill runs line by line.

NC

G-code, from the CNC studio

The toolpaths written as G-code: travel moves, a plunge for every pass, the cut at depth and a safe retract between paths, in millimeters with the spindle speed and feed rates for your machine, material and bit.

Reads on GRBL-based routers and mills — X-Carve, Shapeoko, 3018-class machines — through Universal Gcode Sender, Easel, cnc.js or your own controller software.

Pick it When a router or a mill is making the part, rather than a needle or a nozzle.

Laser machine files

Burn runs and cut paths for a laser head, with the power and focus already decided.

GCODE

G-code, from the laser studio

Raster scan runs at a power per tone, then the vector paths at their own power, feed and pass count, in millimeters — with a Z height for every run when a surface map is in use, and the rotary axis in place of Y on a chuck.

Reads on GRBL and LightBurn-style diode and CO2 lasers through LaserGRBL, LightBurn, Universal Gcode Sender or the controller software that came with the machine.

Pick it When a laser is doing the work: engraving a photo, scoring a line, or cutting clean through plywood, leather or card.

SVG

Vector layer, from the laser studio

The shapes and traced outlines exactly as the job would cut them, at finished size with a hairline stroke and no fill.

Reads on LightBurn, Illustrator, Inkscape and any other laser program you would rather send the job from.

Pick it When you want to arrange, nest or re-power the paths in your own laser software instead of using ours.

Choosing

Which file do I need?

Match the file to the thing doing the making.

A Brother or Baby Lock at home

PES, with the colors already named. Use PEC if your machine or software asks for that instead.

A Janome or a newer Elna

JEF — the same file is the one newer machines call JEF+.

A Pfaff or a Husqvarna Viking

VP3, with the thread colors and the design size inside it.

A Singer

XXX.

A Melco or a Bernina

EXP.

A commercial machine, or a stitching shop

DST. If the shop names a format, send that one instead — DST, PES, PEC, JEF, EXP, VP3 and XXX are all exported here.

A vinyl cutter, card or stencil

SVG from the cut studio — one layer per color.

A laser, a print, or a mock-up for a client

SVG stitch path from the embroidery editor: the design as artwork.

A 3D printer

STL, binary unless something asks for text.

A CNC router or mill

G-code (.nc) from the CNC studio, built for the machine, material and bit you chose.

A laser engraver or laser cutter

G-code (.gcode) from the laser studio, with the power, line interval and surface focus already worked out — or its SVG if you would rather send the job from LightBurn.

Keeping the design to change later

Save it to your library. The pattern keeps the artwork and every setting, so any format can be exported again from it.

Working files

Your software’s own file

Wilcom, Pulse, Melco, Brother and Bernina each keep a closed working file. Here is the file that opens in each one.

Wilcom, Pulse, Melco, Brother My Design Center and Bernina each keep their own working file — EMB, EM, PXF, OFM, PM9, ART. Those files are written by that vendor’s program alone, so they cannot be made here. The DST, EXP or PES below opens in the program, and the program saves its own file from there. One extra step, nothing lost.

EMB

Wilcom EmbroideryStudio

Wilcom’s native working file, with its objects, outlines and lettering. It is written by Wilcom, so open the DST there and save the EMB.

Open DST, then save as EMB.

EM

Wilcom, older versions

The working file of older Wilcom releases. The DST opens in either generation.

Open DST, then save as EM.

PXF

Pulse, Tajima DG/ML

Pulse keeps its objects in PXF. The DST arrives with the right stitch order and color stops to rebuild them.

Open DST, then save as PXF.

OFM

Melco Design Shop

Design Shop’s working file. It opens the EXP directly, then saves the OFM.

Open EXP, then save as OFM.

CND

Melco, early software

The condensed working file of early Melco software; the EXP is the way in.

Open EXP, then save as CND.

PM9

Brother My Design Center, IQ Designer

PES opens in My Design Center and IQ Designer, where the PM9 working file is saved.

Open PES, then save as PM9.

ART

Bernina Embroidery Software

Bernina’s object-editing file. Open the EXP in the Bernina software to edit the objects and save the ART.

Open EXP, then save as ART.

For a DST or an EXP, download the thread list beside it: the colors in sewing order. Set them in the software before you save the working file.

Inside the file

What is in there, and what is not.

Worth knowing before a file surprises you at the machine.

Every stitch, in order

An embroidery file is a long list of needle points, jumps, color changes and stops. The stitch count and run time you saw in the editor are exactly what the machine will sew.

Color changes survive, color names may not

PES, PEC, JEF, VP3 and XXX write the thread list into the file. DST and EXP only stop for each color in sewing order, so you load the threads the machine asks for — the list stays in your saved pattern and in the SVG.

The size you set is the size it stitches

Files are written at the finished width chosen in the editor, in millimeters. The machine does not rescale a design, so set the width and the hoop before you download.

No artwork inside a stitch file

There is no image, font or outline in any stitch file — only stitches. If you need the design as artwork, export the stitch-path SVG or reopen the saved pattern.

Vector files hold paths, not stitches

A cut SVG is closed shapes, one layer per color, for a blade. A stitch-path SVG is every thread color as a stroked line at finished size, for print, proofing or a laser.

An STL is geometry only

Triangles in millimeters, with no color and no printer settings. Hollowing, drain holes, supports and infill are handled in your slicer or with the mesh tools here.

G-code is moves, not artwork

A .nc file holds coordinates, depths, feed rates and spindle commands worked out for one machine, one bit and one material. Change any of those and the toolpaths need rebuilding — reopen the saved CNC job instead of editing the file by hand.

Laser G-code carries its own numbers

Power is written as an S value per run, so a grayscale engraving varies the beam line by line, and a surface map turns into a Z height for every pass. Change the head, the material or the scan interval and the file has to be generated again.