PNG to DST converter
A PNG to DST conversion turns a picture into the needle points a Tajima-format embroidery machine follows. Drop the PNG in, set the hoop and the colors, and the stitches are built in your browser with nothing uploaded.

The short answer
A PNG cannot be saved as a DST, because one is a grid of pixels and the other is a list of needle points. Converting means deciding what each color becomes — a fill, a satin column or a running line — at a size the hoop can hold.
MyImageConvert does that in the browser: the PNG is separated into colors, the stitches are built for the hoop you pick, and the file downloads as DST. If your machine prefers its own format, the same design also writes PES, PEC, JEF, EXP, VP3 and XXX.
- Output
- DST, plus six more
- Also writes
- PES · PEC · JEF · EXP · VP3 · XXX
- Size
- Set against your hoop
- Runs in
- Your browser
Why DST
One file, every machine, no picture inside it.
What the format is, and what it does and does not carry.
It is the format every machine reads
DST is the Tajima format, and it is the one file a Brother, Baby Lock, Bernina, Janome, Pfaff, Husqvarna or Singer machine will accept without an argument. It is also what shops, suppliers and digitizing services hand over.
A DST holds stitches, not a picture
There is no image inside it: only needle points, trims and color stops. That is why a PNG has to be digitized first, and why the file is small enough to travel on a USB stick.
Colors travel as order, not as numbers
DST carries no thread numbers. The colors survive as the sequence of blocks, so the machine stops and waits while you change the spool. Download PES when you want the color list written into the file.
It is the safest file to send
Hand a DST to a shop, a customer or another maker and it opens on their machine as the same stitches you saw. Nothing has to be converted again at the other end.
Steps
PNG in, DST out, in four decisions.
No install, no queue, nothing uploaded to be converted.
Drop the PNG in
The picture is read in your browser, so it is not uploaded to be converted. A logo, a badge, a silhouette or a line of lettering.
Set the hoop and the width
Pick the hoop you will actually stitch and the finished width in millimeters. A machine sews the file at the size it was written, so this is the decision that matters most.
Choose colors and stitches
Two to six colors covers most artwork. Each color takes a fill, a satin column or a running line, and density and underlay follow the fabric you pick.
Download the DST
One file, ready for the USB stick. The stitch count, the color list and the run time you saw on screen are what the machine sews.
Honest limits
What an automatic conversion will not fix.
Worth knowing before a sew-out disappoints you.
Flat artwork converts cleanly
Logos, lettering, badges and two to six solid colors come out well. Soft gradients, fine detail and busy backgrounds are where an automatic pass needs help.
A photograph is not a DST yet
Faces and fine shading need manual work. Automatic digitizing will not turn a portrait into a shop-quality sew-out, whichever converter you use.
Small text needs a bigger design
Letters under about 4 mm high close up when they are sewn. Widen the design, or drop to a simpler font, rather than trusting a preview at screen size.
The hoop is the limit
A design wider than the hoop you picked will not fit it. Set the hoop and the width before the export, and split the design over two hoopings when it is bigger than the field.
Questions
What people ask before converting a PNG to DST.
Short answers, in plain words, matching what the page above says.
How do I convert a PNG to a DST file?
Drop the PNG into the embroidery studio, set the hoop and the finished width, choose how many thread colors to keep, then download the DST. The PNG is separated into color areas and each area is filled with stitches — a fill, a satin column or a running line — in your browser, so the picture is not uploaded in order to be converted.
Is a PNG to DST converter free?
The conversion is free to run: a Free account opens the studio, brings the PNG in and shows the stitch count, the colors and the finished size before anything is downloaded. A Free account downloads the stitch file too, within five projects a month and two saved at a time; the $10-a-month Embroidery Studio plan lifts that allowance and carries the manual editor and the lettering tools. Nothing is charged without a checkout through PayPal.
Will my embroidery machine read a DST file?
Almost certainly. DST is the Tajima format and the one nearly every home and commercial machine reads, which is why shops and digitizing services hand it over. Brother, Baby Lock, Bernina, Janome, Pfaff, Husqvarna and Singer machines all accept it, and if yours prefers its own format the same design downloads as PES, PEC, JEF, EXP, VP3 or XXX.
Why does my DST file have no color information?
Because DST does not store any. The format holds needle points: where to sew, when to trim and when to stop. Color survives only as the order the color blocks run, so the machine stops and waits for you to change the thread. Download PES instead when you want the color numbers carried with the stitches.
What size will the design be?
The size you set, in millimeters, against the hoop you chose. A DST holds the stitches at their finished size and the machine sews the file exactly as written, so set the hoop and the width before you export rather than resizing afterwards.
What kind of PNG converts best to DST?
Flat artwork with two to six solid colors: a logo, lettering, a silhouette, a badge. A transparent background converts most predictably, because the empty area is dropped rather than sewn. Soft gradients, fine detail and photographs need hand work in the editor before the stitches will sew well.
Can I open the DST again and change it?
Yes. Open the DST on this site and the stitches come back in the editor, each color as its own layer, so a stitch can be dragged, a color split or joined and the density retuned, then the design saved out again in any of the seven formats.
