Logo to embroidery file
What makes a logo digitize well, the size to sew it at, and the settings that keep small lettering readable on a shirt.

The short answer
A logo becomes an embroidery file when its colors are separated, each flat area is filled with stitches and each outline is drawn as a satin column, in the order the needle sews them.
The rule that decides whether it looks professional: the smaller the logo, the fewer details it can carry. Size the logo to the placement first, then simplify it until every shape is wide enough to hold a stitch.
Common placements
- Cap front50–55 mm
- Left chest75–90 mm
- Sleeve50–65 mm
- Tote bag150–180 mm
- Jacket back200–250 mm
Before you upload
Four things that decide the result more than any setting.
A logo that meets these needs almost no fixing in the studio.
Use the biggest copy you have
A 2000 px PNG or the original vector file digitizes cleanly. A screenshot or a 300 px logo turns into guesswork.
Flatten the background
A transparent PNG keeps the shape of the logo. A white box behind it becomes white stitching inside the hoop.
Three to six colors
Every color is a thread change and a trim. Gradients, shadows and photo textures turn into noise, so drop them.
Keep hairlines out of small logos
At 80 mm wide, a line thinner than about 1.5 mm cannot hold a satin stitch. Merge those details or enlarge the logo.
Steps
Logo in, stitch file out.
Five steps, all in the browser, nothing to install.
Upload the logo
Drop the SVG or PNG into the embroidery studio. The colors are grouped and every area is shown with its own stitch type.
Clean it in the image editor first if needed
Knock out a background, straighten a scan or recolor a fill there, then hand the cleaned file to the studio.
Set the hoop and the finished width
A left chest logo is 75–90 mm wide. Set that number first; the stitching adjusts to it rather than the other way round.
Pick a stitch per color
Lettering and outlines want satin, big flat fills want a tatami fill, and fine detail wants a running stitch.
Check the preview, then export
The editor shows the stitch direction, count and run time. Export the format your machine reads — DST, PES, PEC, JEF, EXP, VP3 or XXX — at the size you set.
Lettering
Small text is where most logo sew-outs fail.
These are the numbers worth remembering.
Cap height. A letter needs about 5–6 mm of height for a clean satin column. Below 4 mm, strokes merge into a blob and the word stops being readable at arm’s length.
Width, not style. A thin, wide sans-serif reads better than a script face at the same height. If the logo’s font is script, consider sewing only the mark at small sizes.
Spacing. Letters set tight will touch once stitched. Give each one a little air, or switch that area to a running stitch so it stays light.
The fix is size. When lettering looks muddled in the preview, the answer is a wider logo or fewer words — not a tighter stitch spacing.
Next
The rest of the job, in the right order.
Hoop, machine and stitch detail.
Check the hoop
Your finished width has to fit the field inside the hoop, with 6–8 mm to spare all round.
Set the stitch types
Satin for outlines and lettering, tatami fill for large flat color, running stitch for fine lines.
Know your file format
PES for Brother and Baby Lock, JEF for Janome, VP3 for Pfaff and Viking, XXX for Singer, EXP for Melco and Bernina, DST nearly everywhere else — commercial machines included.
Stitch a test first
Sew the logo on the same fabric and backing you will use. Density that is right on cotton is thin on a towel.
