Image to CNC file

MyImageConvert turns a picture into a CNC file: it traces the artwork into toolpaths and writes the G-code moves a router follows, in millimetres, in your browser. Set the machine, material, bit and depth, then download one .nc file for a GRBL sender.

A benchtop CNC router carving the outline of a pale birch sign
Pocket, profile and carve, planned around your machine, bit and material.

The short answer

MyImageConvert turns a picture into a CNC file by tracing it into toolpaths and writing the G-code moves a router follows. Set the machine, material, bit and depth, then download one .nc file in millimetres.

The tracing runs in your browser, so the artwork stays on your device. The studio shows the job size, toolpath count, cut distance and estimated run time before the file is downloaded, and the same artwork can go on to the laser, SVG cut, 3D print or embroidery studio from one account.

Output
G-code (.nc)
Sized in
Millimetres
Machines
X-Carve · Shapeoko · 3018
Runs in
Any browser
Price
$10 / month
Contact
jgrams81@gmail.com

Steps

From a picture on your computer to a file the router runs.

Four settings, one download, and no CAM program to learn first.

Bring in the artwork

A logo, a sign layout, a drawing or a photo. The picture is read in your browser, so it is not uploaded for the conversion.

Name the machine and the bit

Pick the bed and the material, then the bit you will actually chuck: 1/8 in or 1/4 in flat, 1/16 in flat, 1/8 in ball nose or a 60° V-bit. The stepover follows the bit.

Choose what the cut does

Outline follows the edges, carve pockets the shapes, relief machines the light and dark of a picture as height. Set the cut depth and the depth of each pass.

Download the G-code

One .nc file in millimetres, ready for a GRBL sender. The toolpath count, cut distance and estimated run time are shown before you download.

Settings

What each dial changes on the machine.

Everything is set before the export, because the file carries the numbers the router follows.

The finished size is in millimetres

Set the width you want on the material and the height follows the artwork’s proportions, so the file arrives at the size you will actually cut.

Depth decides whether it cuts through

The cut depth is how deep the deepest pass goes. For a through-cut it is the stock thickness plus a little; for an engraving it is a fraction of a millimetre.

Passes keep the bit alive

A deep cut is split into passes of the depth you set, so a 1/8 in bit in oak takes several light passes rather than one that snaps it.

Relief is a picture, not a 3D model

Relief mode machines the artwork’s brightness as height, which suits a carved plaque or a photo on a sign blank. For a real 3D part, model it and send the STL elsewhere.

Honest limits

Where a browser converter stops and a CAM suite begins.

Worth knowing before the first cut into good stock.

Built for 2.5D work

Outlines, pockets and reliefs at a set depth. Undercuts, curved side walls and multi-sided machining belong in a CAM suite.

GRBL G-code

The file is plain G-code written for GRBL senders, the flavour most hobby routers run. A machine that needs its own post-processor is better served by its own software.

Artwork needs clean edges

A high-contrast logo or lettering traces into clean toolpaths. A busy photo with soft shadows turns into a lumpy relief, so simplify it in the image editor first.

The machine still needs setting up

The file carries the moves, not the workholding. Zero the bit, check the material is flat and clamped, and run the first cut above the stock with the spindle on.

Questions

What people ask before the first cut.

Short answers, in the words the questions are asked in.

How do I turn pictures into CNC files?

Drop the picture into MyImageConvert’s CNC studio, choose the machine, the material and the bit, set the finished width and the cut depth, then download the .nc G-code your machine runs. The picture is traced into toolpaths in the browser, so nothing is uploaded, and the job size, toolpath count, cut distance and estimated run time are shown before the download. The CNC studio is $10 a month; a Free account opens it too, with two saved projects at a time and five projects a month.

Can I make G-code from an image in Inkscape or with a Python script?

Yes, and both routes are free. Inkscape traces the picture to vector paths, then an extension such as Gcodetools or the J Tech laser tool writes the moves, and a Python script can post-process them, but each step has to be set up and kept working on your own computer. MyImageConvert does the same job in one step in the browser: the picture is traced into toolpaths, the bit and the depth set the stepover and the passes, and the download is a .nc file in millimetres for a GRBL sender. The CNC studio is $10 a month, and support is by email at jgrams81@gmail.com.

What is the best software for turning photos into CNC cutting patterns?

For a hobbyist router, the shortest path from a photo to a cut file is a browser converter: MyImageConvert traces the artwork into toolpaths and writes G-code for GRBL-based machines such as an X-Carve, a Shapeoko or a 3018-class desktop router, with the material, bit and depth set before export, for $10 a month and nothing installed. A desktop CAM suite such as Vectric VCarve or Aspire is the better tool when a job needs several toolpaths, true 3D modelling or precise fixtures, and Scan2CAD is built for converting technical drawings and PDFs to DXF and G-code. If you already own a CAM suite, use the converter for the artwork step and finish in the program you know.

Which tools do I need to prepare images for CNC projects?

Three: clean artwork, a toolpath plan, and a file the sender can run. MyImageConvert’s image editor removes the background, reduces colours and sharpens edges; the CNC studio traces the result into an outline, a pocket carve or a relief, sets the stepover from the bit and splits the cut into passes the machine can take; and the download is G-code in millimetres. A saved job keeps its machine, material and bit, so a second copy of the same part is one press. Support is by email at jgrams81@gmail.com.